Antminer L3++ Statistics

Antminer L3++ Statistics 2022-2023 and 2021 ● Antminer L3++ with a maximum hash rate of 596Mh/s consuming 1050W of power has a profitability of $0.03 per day. ●...

10 0
10 0
Antminer L3++ Statistics

Antminer L3++ Statistics 2022-2023 and 2021

● Antminer L3++ with a maximum hash rate of 596Mh/s consuming 1050W of power has a profitability of $0.03 per day.
● The antminer L3++ has a noise level of 76db.
● The L3++ has 288pieces of hash chips.
● The L3++ has twice the performance of the L3+.
● The L3++ has four cables on the controller with tight contact.
● Only four coins will bring you profit when working with L3++.
● It can mine two coins at once.
● The L3++ weighs less than 7 kgs.
● The L3++ has a 93% AC/DC power efficiency.

 

Antminer L3++ Facts 2022-2023 and 2021

 

Antminer L3++ with a maximum hash rate of 596Mh/s consuming 1050W of power has a profitability of $0.03 per day. The antminer brings in $3.06 in a day, with its electricity consumption coming in at $3.02. It has a hash rate of 596Mh/s with a power consumption of 1050W. It uses the Bitmain mining scrypt algorithm. In a month, the antminer brings in $91.74 and $1100.87 in a year. The machine profitability in a month is $1.02 and $12.23 for a year. The antminer has a hash rate of 596Mh/s.

The L3++ has a noise level of 76db which mainly comes from the fans. The fans make sure there is no overheating in the system when mining. The fans speed is usually 4300rpm during the day and 3900rpm at night. There is usually more heat during the day, which overworks the fans. The fans automatically rotate according to the room’s temperature, which is detected automatically. There is a thermostat that reflects on any difference in heat levels. The thermostat then acts accordingly to make sure the optimum temperature is maintained. This makes the antminer L3++ best for use at home when mining but can also be used in mining farms.

The L3++ has 288 pieces of hash chips, which are essential in mining crypto. They enable the algorithms and applications to mine and transfer data. Using fewer chips could make the process even slower or even stop the process as a whole. In crypto mining, the time taken is crucial as it interferes with the power consumed and helps you save even more. Each chip also has its heat sink, meaning any extra heat dissipated is gotten rid of maintaining the device’s temperature.

The L3++ performs twice as better as the L3+. The reason for this is the use of four hash boards. The more the boards, the more the heat is produced and hence more rpm by the fans to make sure the temperature is maintained. The more the rpm, the more power is used and more power consumption hence, the less the performance on the L3+. The overclocked chips with an increased hash rate also play a part in the increased performance. The L3++, however, performs lower than the L3. This is because it uses more power than the rest due to the more fans used. The L3+ was an improvement on the L3 and had a better performance than it though there was higher power consumption. The L3++ is a firmware update on L3+ and has better performance and efficiency hence the better profits.

The four cables connected to the controller enable the steady transfer of data in the device. This makes sure the connections are not easily cut off and have a continuous data stream. In addition, the tight contact makes sure the cable is not loose. A loose cable may come off spontaneously, which may cut off the data transfer in the L3++. The PCI-E six-pin interfaces are also crucial in the transfer of data. The 6pin interface enables the direct transfer of data and power through the device for better performance. It simply allows excess power to the device.

Getting a profit from L3++ is only possible in four coins. The coins are DGB+Dodge, LTC+Dodge, NH Scrypt, DODGE and MRR Scrypt. These are the only coins whose algorithms work well to produce income that outweigh the electricity costs incurred. The other coins are XVG, DG, POOLIN LTC, LTC, ANTPOOL LTC, BINANCE LTC, VIABTC LTC, F2POOL LTC, and MPH Scrypt bring income at a lower rate, thereby causing losses to the user. The device mainly uses scrypt algorithms, which have proven to be the better option.

The L3++ can mine two digital currencies at once. It is a dual currency merge mining machine hence getting rid of the hustle of mining the different coins. The most popular mergers are POOLIN LTC, ANTPOOL LTC, DGB+DODGE, LTC+Dodge, BINANCE LTC, VIABTC LTC and F2POOL LTC. Dual currency mining and pool mining generate reliable income. The L3++ has a more substantial computing power which means it has greater chances of profit; therefore, dual currency mining is even better as you mine two different currencies at once. Pool mining involves different miners networking and mining as a unit though it is similar to lone mining.

The L3++ weighs less than 7 kgs and has a small look. This mainly reduces the shipping costs and is easier to rack. The device is also small enough to be portable without damaging it or falling it over. Its small size also allows for easier cooling of the inner components. The L3++ is also made of hard material that is not easily penetrated but at the same time allows it to get rid of excess heat. The excess heat is detrimental to the device’s functioning and may slow its overall functioning. Therefore, a slow L3++ will not produce as much profit as you would like.

The L3++ has high efficiency of 93% while on AC/DC while maintaining a 25degrees Celsius ambient temperature. The power efficiency is very high and ensures the cost of using electricity does not outweigh the profits made. Power is essential in making sure the fans remain functional well to maintain the device’s temperature while you are mining. The general build of the device also assists in power efficiency. It is built so that it does not lose energy wastefully in the form of heat. Its components are also made with technology that saves power.

In this article